TrimBag is the affordable tool to use to trim and sift your flowers. TrimBag meets machine trimming standards with the added benefits of portability, user control and simplicity.
Unzip TrimBag and load in your pre-cut, dried product up to 1/3 capacity (about 2 pounds of flower). Close zippers and secure the flexible end caps to the side of the housing using the built-in magnets. Pick up the TrimBag and hold it horizontally between your arms then use three motion techniques to process the product. Use TrimBag together with the Swagger Bagger for a streamlined system.
Lift the bag from waist level to head level in a vigorous motion keeping elbows bent and wrist straight. Grip the tension straps and twist at the wrists for a Spin technique. Then sift the bag Side to Side.
Friction is the key function to the Trimbag system. For the device to work efficiently, the product must be dry and the humidity in the environment low. You can adjust the rate of motion needed based on the conditions of your product.
During the Lifting Motion, the product is mostly getting friction from tumbling, rolling and rotating against itself and the main chamber. During the Spinning Motion the body of the TrimBag is quickly reversed, the product is sent one direction and the housing is moving the opposite direction. This creates a cross-frictional trim that quickly removes leaf. Every strain is unique.
Periodically check the product during these motions. Test a batch to determine the appropriate number of motions for your product. The Sifting Motion of shaking and bouncing creates friction against the sides and screen. The dual chamber design allows leaf to be poured neatly out of the bottom chamber and initial product to be poured from the top chamber using the unzipped end-cap. Each part of the Motion Series is designed for speed, efficiency and cleanliness.